Why Choose This Perfect Pair?
The combination of a square steel frame and color steel panels is like the bun and patty in a hamburger-the square steel provides robust support (resistant to wind pressure up to level 8), while the color steel panels contribute their lightweight design (weighing only 5kg per square meter). This combination saves 30% on costs compared to pure sheet metal fencing, and the material recycling rate after dismantling can reach 80%, making it particularly suitable for short-term projects of 3-6 months.
Three Steps to Stable Installation
Foundation Treatment: Pre-embed square steel columns every 2 meters and fix them with concrete, ensuring a vertical deviation of less than 5mm.
Frame Welding: Use full welding for the beams and columns; all weld points must be treated with rust prevention.
Panel Fixing: Fix the color steel panels with self-tapping screws at 50cm intervals, and add waterproof sealing strips at the joints.
A Little-Known Fact for Extending Lifespan
The biggest enemy of color steel panels isn't wind and rain, but metal debris from the construction site! These small particles accelerate panel oxidation. Cleaning with a soft brush once a week increases the probability of rust-free installation within two years by 60%. When a typhoon warning is issued, remember to install X-shaped steel pipe supports on the back; the wind resistance will immediately double.
